Internal HD Mini SAS SFF-8643 to 4x 7P SATA Forward Breakout Cable, Straight to Straight 5 3

CAB-8643-4xSATA

Using these in a Supermicro chassis. No issues with the forward breakout layout—SFF-8643 on one end, four standard SATA on the other. Clean signal, no errors.

5

Internal HD Mini SAS SFF-8643 to 4x 7P SATA Forward Breakout Cable, Straight to Straight 5 3

CAB-8643-4xSATA

Really needed bus traces at certain places in our data path. These cables let us hook in to all possible cards/connectors and got the job done.

5

Internal HD Mini SAS SFF-8643 to 4x 7P SATA Forward Breakout Cable, Straight to Straight 5 3

CAB-8643-4xSATA

I was getting into the habit of switching to shorter cables found off amazon, since I didn't want the normal super long 1 meter sas cables in my Fractal Design Meshify 2 XL case. Only problem was that after two-three months I would start getting the dreaded Smart Error 199 (UDMA CRC error count).

So, I started looking for short cables from reputable manufacturers. These .5m cables are a little long still, but no one reputable sells a .3m version. The wire thickness seems to be the same size as the cheap "blue wire" SAS cables; however, I haven't had any CRC errors since i got these cables. Also, if you are using shucked or enterprise drives, these use Molex power so it solves the 3.3v issue that you may face with cables using Sata power.

Overall, this works perfect with my LSI 9400-16i HBA and my older LSI 9300-8i HBA.

5